Procedure 3: Configuring The Rmx's H.323 Network Service To Register With Cma Gatekeeper - Polycom RMX 1500 Administrator's Manual

Polycom RMX 1500/2000/4000 Administrator's Guide
Procedure 3: Configuring the RMX's H.323 Network Service to register with
CMA gatekeeper
1
2
I-18
The Port field must be set to it's default value: 5060.
b
(By default, the Outbound Proxy Server is the same as the SIP Server.)
When configuring RMX to statically route SIP calls to DMA or CUCM, it is important to
also configure the RMX's H.323 Network Service to register with CMA gatekeeper. For
more information see "Procedure 3: Configuring the RMX's H.323 Network Service to
register with CMA gatekeeper" on page I-18.
In the IP Network Services Properties dialog box, click the Gatekeeper tab.
In the MCU Prefix in Gatekeeper field, enter the prefix that the RMX uses to register with
the gatekeeper.
Polycom, Inc.