Polycom RMX 1500 Administrator's Manual page 366

Polycom RMX 1500/2000/4000 Administrator's Guide
5
14-38
The PRI Settings dialog box is displayed:
Define the following parameters:
Table 14-21 PRI Settings
Field
Default Num Type
Num Plan
Net Specific
Dial-out Prefix
Description
Select the Default Num Type from the list.
The Num Type defines how the system handles the dialing digits. For
example, if you type eight dialing digits, the Num Type defines
whether this number is national or international.
If the PRI lines are connected to the RMX via a network switch, the
selection of the Num Type is used to route the call to a specific PRI
line. If you want the network to interpret the dialing digits for routing
the call, select Unknown.
Default: Unknown
Note: For E1 spans, this parameter is set by the system.
Select the type of signaling (Number Plan) from the list according to
information given by the service provider.
Default: ISDN
Note: For E1 spans, this parameter is set by the system.
Select the appropriate service program if one is used by your service
provider (carrier).
Some service providers may have several service programs that can
be used.
Default: None
Enter the prefix that the PBX requires to dial out. Leave this field
blank if a dial-out prefix is not required.
The field can contain be empty (blank) or a numeric value between 0
and 9999.
Default: Blank
Polycom, Inc.