Polycom RMX 1500 Administrator's Manual page 365

3
4
Polycom, Inc.
The Fast Configuration Wizard sequence begins with the ISDN/PSTN dialog box:
Define the following parameters:
Table 14-20 ISDN Service Settings
Field
Network Service
Name
Span Type
Service Type
Click Next.
Description
Specify the service provider's (carrier) name or any other name you
choose, using up to 20 characters. The Network Service Name
identifies the ISDN/PSTN Service to the system.
Default name: ISDN/PSTN Service
Note: This field is displayed in all ISDN/PSTN Network Properties
tabs and can contain character sets that use Unicode encoding.
Select the type of spans (ISDN/PSTN) lines, supplied by the service
provider, that are connected to the RMX. Each span can be defined
as a separate Network Service, or all the spans from the same carrier
can be defined as part of the same Network Service.
Select either:
• T1 (U.S. – 23 B channels + 1 D channel)
• E1 (Europe – 30 B channels + 1 D channel)
Default: T1
PRI is the only supported service type. It is automatically selected.
Chapter 14-Network Services
14-37