Polycom RMX 1500 Administrator's Manual page 516

Polycom RMX 1500/2000/4000 Administrator's Guide
19-24
Table 19-4 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag and Value
SIP_FAST_UPDATE_INTER
VAL_EP
SIP_FREE_VIDEO_RESOU
RCES
SEND_SIP_BUSY_UPON_R
ESOURCE_THRESHOLD
SITE_NAME_TRANSPAREN
CY
SITE_NAMES_ALWAYS_ON
SEND_WIDE_RES_TO_ISD
N
Description
Default setting is 6 to let the RMX automatically send an Intra
request to Microsoft OC endpoints only, every 6 seconds.
Enter any other number of seconds to change the frequency
in which the RMX send the Intra request to Microsoft OC
endpoints only.
Enter 0 to disable this behavior at the endpoint level (not
recommended).
For use in Avaya and Microsoft Environments.
When set to NO (required for Avaya and Microsoft
environments), video resources that were allocated to
participants remain allocated to the participants as long as
they are connected to the conference even if the call was
changed to audio only. The system allocates the resources
according to the participant's endpoint capabilities, with a
minimum of 1 CIF video resource.
Enter YES to enable the system to free the video resources
for allocation to other conference participants. The call
becomes an audio only call and video resources are not
guaranteed to participants if they want to add video again.
Default value in Microsoft environment: NO.
When set to YES, it enables the RMX to send a busy
notification to a SIP audio endpoint or a SIP device when
dialing in to the RMX whose audio resource usage exceeded
the Port Usage threshold.
When set to NO, the system does limit the SIP audio endpoint
connections to a certain capacity and will not send a busy
notification when the resource capacity threshold is
exceeded.
Default: NO
Set the value of this flag to NO to disable Endpoint Name
Transparency.
Default: YES.
Set the value of this flag to YES to enable the permanent
display of Endpoint Names.
Default: NO.
When set to YES, the RMX sends wide screen resolution to
ISDN endpoints.
When set to NO (default), the RMX does not send wide
screen resolution to ISDN endpoints.
Default: NO.
Polycom, Inc.