Polycom RMX 1500 Administrator's Manual page 689

Table C-34 Event Fields for Events 108, 112 - OPERATOR MOVE PARTY TO CONFERENCE,
Field
Restrict
Voice Mode
Number Type
Net SubService
Name
Number of Party
Phone Numbers
Number of MCU
Phone Numbers
Party and MCU
Phone Numbers
Polycom, Inc.
OPERATOR ATTEND PARTY TO CONFERENCE (Continued)
Description
Indicates whether or not the line is restricted, as follows:
27 - Restricted line
28 - Non restricted line
255 - Unknown or not relevant
Indicates whether or not the participant is an Audio Only participant, as
follows:
0 - The participant is not an Audio Only participant
1 - The participant is an Audio Only participant
255 - Unknown
Note: This field is only relevant to dial-out participants.
Note: This field is only relevant to ISDN/PSTN participants.
The type of telephone number, as follows:
0 - Unknown
1 - International
2 - National
3 - Network specific
4 - Subscriber
6 - Abbreviated
255 - Taken from Network Service, default
Note: This field is only relevant to dial-out participants.
Note: This field is only relevant to ISDN/PSTN participants.
The network sub-service name.
An empty field "" means that MCU selects the default sub-service.
Note: This field is only relevant to ISDN/PSTN participants.
The number of participant phone numbers.
In a dial-in connection, the participant phone number is the CLI (Calling Line
Identification) as identified by the MCU.
In a dial-out connection, participant phone numbers are the phone numbers
dialed by the MCU for each participant channel.
Note: This field is only relevant to ISDN/PSTN participants.
The number of MCU phone numbers.
In a dial-in connection, the MCU phone number is the number dialed by the
participant to connect to the MCU.
In a dial-out connection, the MCU phone number is the MCU (CLI) number
as seen by the participant.
Note: This field is only relevant to ISDN/PSTN participants.
The participant phone numbers are listed first, followed by the MCU phone
numbers.
Appendix C-CDR Fields - Unformatted File
C-33