Polycom RMX 1500 Administrator's Manual page 192

Polycom RMX 1500/2000/4000 Administrator's Guide
2
6-4
Define the following fields:
Table 6-2 New Participant – General Properties
Field
Name
Endpoint Website (IP
only)
Dialing Direction
Type
IP Address
(H.323 and SIP Only)
Description
Enter the name of the participant or the endpoint as it will be
displayed in the RMX Web Client.
The Name field can be modified using Unicode encoding.
•
English text uses ASCII encoding and can contain the most
characters (length varies according to the field).
•
European and Latin text length is approximately half the length of
the maximum.
•
Asian text length is approximately one third of the length of the
maximum.
Maximum field length in ASCII is 80 characters.
The maximum length of text fields varies according to the mixture of
character sets used (Unicode and ASCII).
This name can also become the endpoint name that is displayed in
the video layout. For more details about endpoint (site) names, see
the RMX 1500/2000/4000 Getting Started Guide, ""Text Indication in
the Video Layout" on page 3-30".
Note: This field is displayed in all tabs.
Click the Endpoint Website hyperlink to connect to the internal
website of the participant's endpoint. It enables you to perform
administrative, configuration and troubleshooting activities on the
endpoint.
The connection is available only if the IP address of the endpoint's
internal site is defined in the Website IP Address field.
Select the dialing direction:
•
Dial-in – The participant dials in to the conference.
•
Dial-out – The MCU dials out to the participant.
Notes:
• This field applies to IP participants only.
• Dial-out is forced when defining an ISDN/PSTN participant.
The network communication protocol used by the endpoint to connect
to the conference: H.323, SIP or ISDN/PSTN.
The fields in the dialog box change according to the selected network
type.
Enter the IP address of the participant's endpoint.
•
For H.323 participant define either the endpoint IP address or
alias.
•
For SIP participant define either the endpoint IP address or the
SIP address.
Note: This field is hidden when the ISDN/PSTN protocol is selected.
Polycom, Inc.