Ultra_Secure_Mode System Flag Descriptions - Polycom RMX 1500 Administrator's Manual

Table 19-9
Cyclic File Systems
ENABLE_CYCLIC_FIL
E_SYSTEM_ALARMS

ULTRA_SECURE_MODE System Flag Descriptions

Table 19-10
Flag
Network Security
SEPARATE_MNGT_NET
WORK
Login and Session Management
APACHE_KEEP_ALIVE_
TIMEOUT
SESSION_TIMOUT_IN_
MINUTES
USER_LOCKOUT
USER_LOCKOUT_WIND
OW_IN_MINUTES
USER_LOCKOUT_DUR
ATION_IN_MINUTES
LAST_LOGIN
_ATTEMPTS
Polycom, Inc.
ULTRA_SECURE_MODE Flag Value – Effect on System Flags (Continued)
Flag
Range
YES/NO
ULTRA_SECURE_MODE System Flag Descriptions
Description
When this System Flag is set to YES, all signaling between IP
endpoints and the RMX is via the LAN 2 port, while all RMX
management sessions are hosted via the LAN 3 port.
The time allowed for the connection between a client and the Apache
Server to be idle before the connection is terminated.
If there is no input from the user or if the connection is idle for longer
than the number of minutes specified by the setting of this System
Flag, the connection to the RMX is terminated. A flag value of 0 means
Session Timeout is disabled, This feature cannot be disabled when the
RMX is in Ultra Secure mode.
User Lockout can be enabled to lock a user out of the system after
three consecutive Login failures with same User Name. The user is
disabled and only the administrator can enable the user within the
system.
User Lockout is enabled when the flag is set to YES
The time period during which the three consecutive Login failures
occur is determined by the value of this System Flag. A flag value of 0
means that three consecutive Login failures in any time period will
result in User Lockout.
The duration of the Lockout of the user is determined by the value of
this System Flag. A flag value of 0 means permanent User Lockout
until the administrator re-enables the user within the system.
The system can display a record of the last Login of the user. It is
displayed in the Main Screen of the RMX Web Client or RMX Manager.
To enable it, set this System Flag to YES.
ULTRA_SECURE_MODE =
YES
Default
YES
Chapter 19-RMX Administration and Utilities
NO
Range Default
YES/NO NO
19-37