Polycom RMX 1500 Administrator's Manual page 194

Polycom RMX 1500/2000/4000 Administrator's Guide
3
6-6
Table 6-2 New Participant – General Properties (Continued)
Field
SIP Address/Type
(SIP Only)
Endpoint Website IP
Address
(IP only)
Audio Only
Usually, additional definitions are not required and you can use the system defaults for
the remaining parameters. In such a case, click OK.
To modify the default settings for advanced parameters, click the Advanced tab.
Description
Select the format in which the SIP address is written:
• SIP URI - Uses the format of an E-mail address, typically
containing a user name and a host name: sip:[user]@[host]. For
example, sip:dan@polycom.com.
• TEL URI - Used when the endpoint does not specify the domain
that should interpret a telephone number that has been input by
the user. Rather, each domain through which the request passes
would be given that opportunity. As an example, a user in an
airport might log in and send requests through an outbound proxy
in the airport. If the users enters "411" (this is the phone number
for local directory assistance in the United States), this number
needs to be interpreted and processed by the outbound proxy in
the airport, and not by the user's home domain.
In this case, tel: 411 is the correct choice.
Note: This field is removed from the dialog box when the ISDN/PSTN
protocol is selected.
Enter the IP address of the endpoint's internal site to enable
connection to it for management and configuration purposes.
This field is automatically completed the first time that the endpoint
connects to the RMX. If the field is blank it can be manually
completed by the system administrator. The field can be modified
while the endpoint is connected
Select this check box to define the participant as a voice participant,
with no video capabilities.
Polycom, Inc.