Polycom RMX 1500/2000/4000 Administrator's Guide
Support for MIB-II Sections
The following table details the MIB-II sections that are supported:
Table 19-18
Section
system
interfaces
ip
The Alarm-MIB
MIB used to send alarms. When a trap is sent, the Alarm-MIB is used to send it.
H.341-MIB (H.341 – H.323)
•
•
Standard MIBs
This section describes the MIBs that are included with the RMX. These MIBs define the
various parameters that can be monitored, and their acceptable values
MIB Name
MULTI-MEDIA-MIB-TC
(MULTIMTC.MIB)
H.320ENTITY-MIB
(H320-ENT.MIB)
H.320MCU-MIB (H320-
MCU.MIB)
H323MC-MIB (H323-
MC.MIB)
19-64
Supported MIB-II Sections
Object Identifier
mib-2 1
mib-2 2
mib-2 4
Gives the address of the gatekeeper.
Supports H.341-MIB of SNMP events of H.323.
Description
Defines a set of textual conventions used within the set of Multi Media
MIB modules.
This is a collection of common objects, which can be used in an H.320
terminal, an H.320 MCU and an H.320/H.323 gateway. These objects
are arranged in three groups: Capability, Call Status, and H.221
Statistics.
Used to identify managed objects for an H.320 MCU. It consists of four
groups: System, Conference, Terminal, and Controls. The Conference
group consists of the active conferences. The Terminal group is used to
describe terminals in active MCU conferences. The Controls group
enables remote management of the MCU.
Used to identify objects defined for an H.323 Multipoint Controller. It
consists of six groups: System, Configuration, Conference, Statistics,
Controls and Notifications. The Conference group is used to identify the
active conferences in the MCU. The Notifications group allows an MCU,
if enabled, to inform a remote management client of its operational
status.
Note: The RMX supports only one field in H.341-H323MC MIB. The
RMX reports the Gatekeeper address using H.341-H323MC MIB –
323McConfigGatekeeperAddress (0.0.8.341.1.1.4.2.1.1.4) in response
to a query from a manager.
.
Polycom, Inc.
Need help?
Do you have a question about the RMX 1500 and is the answer not in the manual?
Questions and answers