Enabling Active Directory Integration - Polycom RMX 1500 Administrator's Manual

Polycom RMX 1500/2000/4000 Administrator's Guide
•
•
•
•
•
•
•
•

Enabling Active Directory Integration

To configure Directory Services:
1
2
F-20
— Audit Events – users that generate these events are marked as being either internal
or external.
— Successful user logins
— Failed user login attempts
User passwords and user lockout policy for external users are managed via Active
Directory's integration with the user's host machine.
Enabling or disabling Active Directory integration does not require a reset.
In Standard Security Mode multiple accounts of all user types are supported. In Ultra
Secure Mode, enabling Active Directory integration is only permitted if the RMX only has
one local Administrator User.
Multiple Machine Accounts with various roles are supported.
Microsoft Active Directory is the only directory service supported.
Active Directory integration is configured as part of the Management Network.
Both IPv4 and IPv6 addressing are supported.
In Standard Security Mode, the Active Directory can be queried using Basic or NTLM
without TLS. In Ultra Secure Mode TLS is required.
On the RMX menu, click Setup > Exchange Integration Configuration.
The Directory Services - Configuration dialog box is displayed.
Modify the following fields.
Table F-3 Directory Services - Configuration
Field
Connect to the
Enterprise Directory
Server
IP Address or DNS
Name
Description
Select this check box to enable or disable the Active Directory feature.
Enter the IP address or DNS name of the Enterprise Directory Server
(Active Directory).
Polycom, Inc.