Starting A Conference; Starting A Conference From The Conferences Pane - Polycom RMX 1500 Administrator's Manual

Starting a Conference

There are several ways to start a conference:
•
•
•
•
•

Starting a Conference from the Conferences Pane

To start a conference from the Conference pane:
1
2
Polycom, Inc.
Clicking the New Conference button in the Conferences pane. For more information, see
"Starting a Conference from the Conferences Pane" on page 15.
Dialing in to a Meeting Room defined on any of the MCUs.
— A Meeting Room is a conference that is saved on the MCU. It remains in passive
mode until it is activated by the first participant, or the meeting organizer, dialing
in.
For more information about Meeting Rooms, see "Meeting Rooms" on page 4-1.
Dialing in to an Ad Hoc Entry Queue defined on one of the MCUs which is used as the
access point to the MCU.
For a detailed description of Ad Hoc Entry Queues, see
"Entry Queues" on page 5-1.
Start a Reservation:
— If the Start Time of the Reservation is past due the conference becomes ongoing
immediately.
— If the Start Time of the Reservation is in the future the conference becomes ongoing,
at the specified time on the specified date.
For more information, see "Starting a Reservation" on page 16.
Start any Conference Template saved in the Conference Templates list.
For more information, see "Starting an Ongoing Conference or Reservation From a
Template" on page 17.
In the MCUs pane, select the MCU to run the conference.
In the Conferences pane, click the New Conference ( ) button.
The New Conference – General dialog box opens.
Chapter 18-RMX Manager Application
18-15