Gateway Profiles; Hardware Monitor - Polycom RMX 1500 Administrator's Manual

Gateway Profiles

To enable the RMX to call the destination endpoint/MCU via IP connection, the Network
Service for the call must be selected in the Gateway Profile dialog box.
The Network Service set as default is used if no other Network Service is selected.
If the same Network Service is used for H.323 and SIP calls, the Network Service Environment
must include both H.323 and SIP settings.

Hardware Monitor

The Hardware Monitor pane includes the status of the LAN ports on the RTM LAN cards.
Polycom, Inc.
Chapter 14-Network Services
14-63