Polycom RMX 1500 Administrator's Manual page 505

Polycom, Inc.
Table 19-2 System Flags – MCMS_PARAMETERS (Continued)
Flag
PASS_EXP_DAYS_MACHIN
E
PASSWORD_HISTORY_SIZ
E
RMX2000_RTM_LAN
SEPARATE_MANAGEMENT
_NETWORK
SESSION_TIMEOUT_IN_MI
NUTES
SITE_NAMES_LOCATION
SUPPORT_HIGH_PROFILE
Description
Enables the administrator to change the password expiration
period of Application-user's independently of regular users.
Default: 365 (days).
The number of passwords that are recorded to prevent users
from re-using their previous passwords.
Values are between 0 and 16.
0 (standard default) - the rule is not enforced, however this
rule cannot be disabled when the RMX is in Ultra Secure
Mode.
In Ultra Secure Mode, at least 10 passwords (default) and up
to 16 passwords must be retained.
For more details, see "Implementing Password Re-Use /
History Rules" on page 13-11.
This flag is used after installation on and RTM-LAN card to
activate the card. The flag must be set to YES. (RMX2000
only.)
Enables/disables the Network Separation. Can only be
disabled in the Ultra Secure Mode
(ULTRA_SECURE_MODE=YES).
Default: NO.
If there is no input from the user or if the connection is idle for
longer than the number of minutes specified by this flag, the
connection to the RMX is terminated.
Value: 0-99
0 - Session Timeout is disabled, however this feature cannot
be disabled when the RMX is in Ultra Secure Mode.
Default: 0
Default (ULTRA_SECURE_MODE=YES): 15
The default location of the Endpoint Name in the video layout
can be changed.
Default: DOWN CENTER = Bottom, centered
Range:
• UP_RIGHT = Top, right justified
• UP_LEFT = Top, left justified
• DOWN_RIGHT = Bottom, right justified
•
DOWN_LEFT = Bottom, left justified
•
UP_CENTER = Top, centered
•
DOWN_CENTER = Bottom, centered
This flag is specific to CP conferences and has no effect on
VSW conferences.
Range: YES / NO
Default: YES
Chapter 19-RMX Administration and Utilities
19-13