Polycom RMX 1500 Administrator's Manual page 40

Polycom RMX 1500/2000/4000 Administrator's Guide
1-18
Table 1-2 Profile Properties - Video Settings (Continued)
Field/Option
Auto Layout
Telepresence Mode
Telepresence Layout
Mode
Description
When selected (default), the system automatically selects the
conference layout based on the number of participants currently
connected to the conference. When a new video participant connects
or disconnects, the conference layout automatically changes to
reflect the new number of video participants.
For more information, see Table 1-3 "Auto Layout – Default Layouts"
on page 1-19.
Clear this selection to manually select a layout for the conference.
The default Auto Layout settings can be customized by modifying
default Auto Layout system flags in the System Configuration file. For
more information see, "Auto Layout Configuration" on page 19-27.
Select the Telepresence Mode from the drop-down menu:
•
Off - Normal conference video is sent by the RMX.
•
Auto (Default) - If any ITP (Immersive Telepresence) endpoints
are detected, ITP features are applied to the conference video for
all participants.
When Auto is selected, the ITP features are dynamic. If all ITP
endpoints disconnect from the conference, normal conference
video is resumed for all participants. ITP features are resumed for
all participants should an ITP endpoint re-connects to the
conference.
• On - ITP features are applied to the conference video for all
participants regardless of whether there are ITP endpoints
connected or not.
Notes:
• This field is enabled only if the RMX system is licensed for
Telepresence Mode.
The Telepresence Layout Mode drop- down menu, enables VNOC
operators and Polycom Multi Layout Applications to retrieve
Telepresence Layout Mode information from the RMX.
The following modes can be selected:
•
Manual
• Continuous presence - Room Continuous Presence (Default)
• Room Switch - Voice Activated Room Switching
Polycom, Inc.