Polycom RMX 1500 Administrator's Manual page 168

Polycom RMX 1500/2000/4000 Administrator's Guide
5
6
Setting the Flags on the RMX
When running conferences in mixed environment (RMX and MGC) there may be small
differences between the line rates each MCU is sending. In the RMX 2000/4000, several flags
must be set to ensure that these differences will not cause the cascaded link to connect as
Secondary and that Content flows correctly between the cascaded conferences. This
procedure is performed once per RMX.
1
2
3-38
For Example:
Cascade-enabled
EQ ID
Method B (Using a gatekeeper):
In the Alias Name field, enter the Prefix of MCU B, EQ ID, Destination Conference ID,
and Password, as follows:
MCU Prefix EQ ID##Conference ID##Password (Password is optional)
For Example:
MCU Prefix as
registered in the
gatekeeper
Click the Advanced tab and in the Node Type field, select Terminal.
Click OK.
In the RMX Web Client menu, click Setup>System Configuration.
In the System Flags dialog box, add the following new flags and values:
— MIX_LINK_ENVIRONMENT=YES
Setting this flag to YES will adjust the line rate of HD Video Switching conferences
run on the RMX 2000/4000 from 1920Kbps to 17897Kbps to match the actual rate of
1002##12001##1234
Destination Password (optional)
Conference ID
9251002##12001##1234
Cascade-enabled Conference ID
EQ ID
Password (optional)
Polycom, Inc.