Polycom RMX 1500 Administrator's Manual page 234

Polycom RMX 1500/2000/4000 Administrator's Guide
4
5
8-8
Table 8-1 New Profile - General Parameters (Continued)
Field/Option
Operator Conference
Click the Advanced tab.
The New Profile – Advanced dialog box opens.
Define the following parameters:
Table 8-2 New Profile - Advanced Parameters
Field/Option
Encryption
LPR
Description
Select this option to define the profile of an Operator conference.
An Operator conference can only be a Continuous Presence
conference, therefore when selected, the High Definition Video
Switching option is disabled and cleared.
When defining an Operator Conference, the Send Content to Legacy
Endpoints option in the Video Settings tab is cleared and disabled.
Description
Select this check box to activate encryption for the conference. For
more information, see "Message Overlay" on page 2-45.
When selected (default for CP conferences), Lost Packet Recovery
creates additional packets that contain recovery information used to
reconstruct packets that are lost during transmission.
LPR is automatically disabled if High Definition Video Switching is
selected. For more information, see "LPR – Lost Packet Recovery" on
page 2-62.
Polycom, Inc.