Configuring The Rmx 1500/2000/4000 For Microsoft Integration; Modify The Rmx Management Network Service To Include The Dns Server - Polycom RMX 1500 Administrator's Manual

Polycom RMX 1500/2000/4000 Administrator's Guide
Configuring the RMX 1500/2000/4000 for Microsoft
Integration
The RMX is integrated in Microsoft Office Communications Server R1 and R2 (Wave 13) and
Microsoft Lync Server environments by setting its Transport Type (in the SIP server
configuration) to TLS and creating a certificate that is sent to the RMX. This procedure is
also required when encryption of SIP signaling is used.
If a Load Balancer is used in Microsoft Office Communications Server R1 environment, the transport
type may be set to TCP or TLS.
In addition, if the DNS server was not enabled in the Network Management Service on the
RMX, it must be enabled for the integration in Microsoft Office Communications Server
(Wave 13, R1 and R2) and the Lync Server (Wave 14) environments.

Modify the RMX Management Network Service to Include the DNS Server

The Management Network that is defined during first entry setup does not include the
definition of the DNS which is mandatory in Microsoft environment and has to be modified.
In Multiple Networks configuration, only one DNS server can be defined in one of the Signaling
network Service for the entire environment. In such a configuration, do not define the DNS Server in
the Management Network Service and skip this procedure.
To add the definition of the DNS to the Management Network in the RMX:
1
2
3
4
5
H-34
Using the Web browser, connect to the RMX.
In the RMX Management pane, expand the Rarely Used list and click IP Network
Services ( ).
In the IP Network Services pane, double-click the Management Service
The Management Network Properties - IP dialog box opens.
Click the DNS tab.
In the DNS field, select Specify to define the DNS parameters.
.
Polycom, Inc.