Polycom RMX 1500 Administrator's Manual page 276

Polycom RMX 1500/2000/4000 Administrator's Guide
11-4
Table 11-1 Conference Properties - General (Continued)
Field
Start Time
End Time
Conference
Password
Chairperson
Password
ID
Profile
Line Rate
Video Switching
Reserve Resources
for Video Participants
Description
The time the conference started
The expected conference end time
A numeric password for participants to access the conference.
A numeric password used by participants to identify themselves as
the conference chairperson.
The conference ID.
The name of the conference Profile from which conference
parameters were taken.
The maximum transfer rate, in kilobytes per second (Kbps) of the call
(video and audio streams).
When selected, the conference is of ultra-high quality video
resolution, in a special conferencing mode which implies that all
participants must connect at the same line rate and use HD video.
This feature utilizes the resources more wisely and efficiently by:
•
Saving utilization of video ports (1 port per participant as opposed
to 4 ports in CP mode).
•
Video display is in full screen mode only.
Drawbacks of this feature are that all participants must connect at the
same line rate, (e.g. HD) and all participants with endpoints not
supporting HD will connect as secondary (audio only).
Video layout changes are not enabled during a conference.
Video Switching supports the following resolutions:
•
MPM:
•
HD 720P
•
MPM+:
• HD 1080p
• MPMx:
•
1080p30
•
720p30
•
720p60
•
SD30
If HD 1080p is selected, endpoints that do not support HD 1080p
resolution are connected as Secondary (Audio Only) participants.
Note: Video Switching conferencing mode is unavailable to ISDN
participants.
For more information, see "Video Resolutions in CP" on page 2-3.
Displays the number of video participants for which the system
reserved resources.
Default: 0 participants.
.
.
Polycom, Inc.