Polycom RMX 1500 Administrator's Manual page 333

Table 14-1
Field
Control Unit IP
Address
Shelf Management
IP Address
Subnet Mask
Secured
Communication
Polycom, Inc.
Default Management Network Service – IP (Continued)
Description
IPv4
IPv6
IPv4
IPv6
Enter the subnet mask of the Control Unit.
Note: This field is specific to IPv4 and is not displayed in Ipv6 only mode.
Select to enable Secured Communication.
The RMX supports TLS 1.0 and SSL 3.0 (Secure Socket Layer).
A SSL/TLS Certificate must installed on the RMX for this feature to be
enabled. For more information see "Secure Communication Mode" on
page F-1.
The IPv4 address of the RMX Control Unit. This IP
address is used by the RMX Web Client to
connect to the RMX.
The IPv6 address of the RMX Control Unit. This IP
address is used by the RMX Web Client to
connect to the RMX.
Note: Internet Explorer 7™ is required for the
RMX Web Client to connect to the RMX using
IPv6.
Click the All button to display the IPv6
addresses as follows:
•
Auto - If selected, Site-Local and
All
Global site addresses are displayed.
•
Manual if selected, only the Manual site
address is displayed.
The IPv4 address of the RMX Shelf Management
Server. This IP address is used by the RMX Web
Client for Hardware Monitoring purposes.
The IPv6 address of the RMX Shelf Management
Server. This IP address is used by the RMX Web
Client for Hardware Monitoring purposes.
Note: Internet Explorer 7™ is required for the
RMX Web Client to connect to the RMX using
IPv6.
Click the All button to display the IPv6
addresses as follows:
• Auto - If selected, Site-Local and
All
Global site addresses are displayed.
•
Manual if selected, only the Manual site
address is displayed.
Chapter 14-Network Services
14-5