Modifications To The Master Mcu Requiring System Reset - Polycom RMX 1500 Administrator's Manual

3

Modifications to the Master MCU Requiring System Reset

Modifications to the configuration of the Master MCU that require a System Reset cannot be
performed while Hot Backup is enabled.
To modify the Master MCU configuration:
1
2
3
4
5
Polycom, Inc.
Click OK.
Disable the Hot Backup on the Master and Slave MCUs.
Modify the Master MCUs configuration.
Reset the Master MCU.
When the reset is complete, enable Hot Backup on the Master and Slave MCUs.
If required, reset the Slave MCU.
Chapter 19-RMX Administration and Utilities
19-75