Monitoring The Connection To The Stun And Relay Servers In The Ice Environment; Monitoring The Participant Connection In Ice Environment - Polycom RMX 1500 Administrator's Manual

Monitoring the Connection to the STUN and Relay Servers in the ICE Environment

1
2
3

Monitoring the Participant Connection in ICE Environment

For each participant in the conference running in ICE environment, you can view the local
and the external IP addresses and the type of connection between the RMX and the
participant (remote).
The ICE information is displayed only for the media channels and not the signaling channel.
To view the channel properties of the participant:
1
Polycom, Inc.
In the RMX Web browser, in the RMX Management pane, click Signaling Monitor.
In the Signaling Monitor pane, click the IP Network Service entry.
Click the ICE Servers tab.
The system lists the ICE servers to which it is connected and the status of the connection
of each of the RMX media cards (status 1, status 2, etc) to ICE servers. (One status is
displayed for RMX 1500, two statuses are displayed for RMX 2000 and four statuses are
displayed for RMX 4000).
It addition, the system indicates the status of the firewall detection in the RMX.
In the participants pane, double-click the participant entry or right-click the participant
entry and then click Properties.
Appendix H-Setting the RMX for Integration Into Microsoft Environment
H-65