Polycom RMX 1500 Administrator's Manual page 750

Polycom RMX 1500/2000/4000 Administrator's Guide
For example: rmx111@ilsnd.vsg.local
The call reaches the Transit Entry Queue of the RMX and via IVR is routed to the destination
conference.
This method is added to the local connections and Matched URI and Numerical Dialing
methods available in Microsoft Office Communication environment and the Numerical
Dialing method available in the Lync server environment.
The following table summarizes the dialing methods and its availability in the various
configurations.
Table H-1
Local
Branch office
Remote
Federation
* To enable the Matched URI dialing in the federated environment to be able to connect to the RMX
SIP signaling domain, you must also configure the Office Communications Server/Lync Server.
When federating an Office Communications Server/Lync Edge server with another Office
Communications Server/Lync server environment, you need to include the FQDN of the
Office Communications Server/Lync Edge server as well as the SIP signaling domain for
federated environment. The SIP signaling domain is the FQDN of the Polycom DMA system
or a Polycom RMX system (when your deployment does not include a DMA system).
For example, if company B wants to set up federation with company A and receive and send
SIP calls that will be handled by the Polycom SIP signaling domain in company A, you need
to add the FQDN of the company A Office Communications Server domain as well as the
SIP signaling domain of company A to the list of internal SIP Server domains supported by
the company B Office Communications Server/Lync Server environment.
For more information, see the Microsoft documentation and the Polycom® Unified
Communications Deployment Guide for Microsoft® Environments.
H-4
Available dialing methods per Connection Type
Matched URI
Routing




Numerical Registered
Dialing User Name
 

X

X

X
Polycom, Inc.