Polycom RMX 1500 Administrator's Manual page 368

Polycom RMX 1500/2000/4000 Administrator's Guide
7
8
9
10 Define the following parameters:
•
•
11 Click OK.
12 Optional. Repeat steps 8 to 10 to define additional dial-in ranges.
13 Enter the MCU CLI (Calling Line Identification).
14 Click Save & Continue.
15 Click OK to continue the configuration.
14-40
Click Next.
The Phones dialog is displayed.
To define dial-in number ranges click the Add button.
The Add Phone Number dialog box opens.
Table 14-23 Phones Settings
Field
First Number
Last Number
A range must include at least two dial-in numbers.
A range cannot exceed 1000 numbers.
The new range is added to the Dial-in Phone Numbers table.
In a dial-in connections, the MCU CLI indicates the MCU's number dialed by the
participant. In a dial-out connection, indicates the MCU (CLI) number as seen by the
participant
After clicking Save & Continue, you cannot use the Back button to return to previous
configuration dialog boxes.
The ISDN/PSTN Network Service is created and confirmed.
Description
The first number in the phone number range.
The last number in the phone number range.
Polycom, Inc.