Polycom RMX 1500 Administrator's Manual page 347

Multipoint control unit
Hide thumbs Also See for RMX 1500:
Table of Contents

Advertisement

Polycom, Inc.
Table 14-9
Default IP Network Service – SIP Servers (Continued)
Field
Create Certificate
Certificate Method
Send Certificate
SIP Servers: Primary / Alternate Server Parameter
Server IP Address
Server Domain Name
Port
Outbound Proxy Servers: Primary / Alternate Server Parameter
Server IP Address
Port
Description
This button is used to create a Certificate Request to be sent to a
Certification Authority.
Select the method for sending the Certificate to the RMX:
CSR
PEM/PFX
For more information see "The Security Certificate" on page H-35.
This button is used when Integrating the RMX Into the Microsoft OCS
Environment. For more information, see "Setting the RMX for
Integration Into Microsoft Environment" on page H-1.
Enter the IP address of the preferred SIP server.
If a DNS is used, you can enter the SIP server name.
Note: When in IPv4&IPv6 or in IPv6 mode, it is easier to use Names
instead of IP Addresses.
Enter the name of the domain that you are using for conferences, for
example:
user_name@domain name
The domain name is used for identifying the SIP server in the
appropriate domain according to the host part in the dialed string.
For example, when a call to EQ1@polycom.com reaches its
outbound proxy, this proxy looks for the SIP server in the
polycom.com domain, to which it will forward the call.
When this call arrives at the SIP server in polycom.com, the server
looks for the registered user (EQ1) and forwards the call to this Entry
Queue or conference.
Enter the number of the TCP or UDP port used for listening. The port
number must match the port number configured in the SIP server.
Default port is 5060.
By default, the Outbound Proxy Server is the same as the SIP Server.
If they differ, modify the IP address of the Outbound Proxy and the
listening port number (if required).
Note: When in IPv4&IPv6 or in IPv6 mode, it is easier to use Names
instead of IP Addresses.
Enter the port number the outbound proxy is listening to.
The default port is 5060.
Chapter 14-Network Services
14-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rmx 4000Rmx 2000

Table of Contents