Polycom RMX 1500 Administrator's Manual page 47

21 Click the Network Services check box.
22 Define the following parameters:
Polycom, Inc.
The New Profile - Network Services tab opens.
Registration of conferencing entities such as ongoing conferences, Meeting Rooms,
Entry Queues, SIP Factories and Gateway Sessions with SIP servers is done per
conferencing entity. This allows better control on the number of entities that register
with each SIP server. Selective registration is enabled by assigning a conference Profile
in which registration is configured to the required conferencing entities. Assigning a
conference Profile in which registration is not configure to conferencing entities will
prevent them from registering. By default, Registration is disabled in the Conference
Profile, and must be enabled in Profiles assigned to conferencing entities that require
registration.
Table 1-8 Profile Properties - Network Services
Parameter
IP Network Services:
Service Name
SIP Registration
Accept Calls
Description
This column lists all the defined Network Services, one or several
depending on the system configuration.
To register the conferencing entity to which this profile is assigned
with the SIP Server of the selected Network Service, click the check
box of that Network Service in this column.
To prevent dial in participants from connecting to a conferencing
entity when connecting via a Network Service, clear the check box of
the Network Service from which calls cannot connect to the
conference.
Chapter 1-Conference Profiles
1-25