Default Ip Network Service; Rmx Configuration Enabling Isdn Cascading Links - Polycom RMX 1500 Administrator's Manual

RMX Configuration Enabling ISDN Cascading Links

To enable Gateway-to-Gateway, Gateway-to-MCU and MCU-to-MCU calls over ISDN
Cascading links, the following configurations are required:
•
•
•
•
•
Polycom, Inc.
Modifying the IP Network Service to include the MCU Prefix in the Gatekeeper (in the
Gatekeepers dialog box). For more details, see "Modifying the Default IP Network Service"
on page 14-10.
ISDN Network Service is configured in both MCUs. For more details, "Modifying an
ISDN/PSTN Network Service" on page 14-42.
Configuring a Gateway Profile and assigning dial-in ISDN/PSTN numbers. For details,
see "Defining the Gateway Profile" on page 17-13.
Configure the Entry Queue or conference (for direct dial-in) is enabled for ISDN
connection and a dial-in number is assigned (for example 54145106).
Defining the dial-in ISDN participant in MCU B and Dial-out ISDN participant in MCU
A (for MCU-to-MCU cascading conferences).
Chapter 3-Cascading Conferences
3-9