Ethernet Settings - Polycom RMX 1500 Administrator's Manual

Polycom RMX 1500/2000/4000 Administrator's Guide

Ethernet Settings

In RMX 1500/4000, the automatically identified speed and transmit/receive mode of each
LAN port used by the system can be manually modified if the specific switch requires it.
These settings can be modified in the Ethernet Settings dialog box and they are not part of the
Management Network dialog box as for RMX 2000.
RMX 1500: The Port numbers displayed in the dialog box do not reflect the physical Port numbers
as labeled on the RMX 1500 MCU.
Table 14-12 shows the physical mapping of Port Type to the physical label on the back panel
of the RMX 1500.
Table 14-12
Port Type
Media
Modem
Management 1
Signaling 1
ShM
To modify the automatic LAN port configuration:
1
14-22
Physical Mapping - Port Type to Label on RMX 1500 and RMX 4000
LAN 2
Modem
MNG B
MNG
Shelf
On the RMX menu, click Setup > Ethernet Settings.
The Ethernet Settings dialog box opens.
RMX 4000
Label on MCU
1500
LAN 2
LAN 1
LAN 2
LAN 3
LAN 6
4000
RTM LAN Card
RTM-IP 4000 Card
RMX 1500
Polycom, Inc.