Encryption Flag Settings; Enabling Encryption In The Profile; Enabling Encryption At The Participant Level - Polycom RMX 1500 Administrator's Manual

Encryption Flag Settings

To modify the Encryption flag:
1
2
3
For more information, see "System Configuration" on page 19-4.
>> Reset the MCU for flag changes to take effect.

Enabling Encryption in the Profile

Encryption for the conference is in the Profile and cannot be changed once the conference is
running.
To enable encryption at the conference level:
>> In the Conference Profile Properties – Advanced dialog box, select the Encryption check

Enabling Encryption at the Participant Level

You can select the encryption mode for each of the defined participants. Encryption options
are affected by the settings of the flag in the system configuration. Undefined participants
are connected with the Participant Encryption option set to Auto, inheriting the conference/
Entry Queue encryption setting.
Polycom, Inc.
Click Setup>System Configuration.
The System Flags dialog box opens.
Set the ALLOW_NON_ENCRYPT_PARTY_IN_ENCRYPT_CONF flag to YES or NO.
Click OK.
box.
The recording link from an encrypted conference to the RSS set to encryption can be
encrypted. For more details, see "Recording Link Encryption" on page 12-6.
Chapter 2-Additional Conferencing Information
2-59