Polycom RMX 1500 Administrator's Manual page 623

5
Polycom, Inc.
Run Diagnostic Tests & Tests Monitoring by clicking the Run Tests button. In the
Hardware Monitor pane, the toolbar and card statuses change to Tests in progress.
Table 20-18 Run Tests - Parameters
Parameter
Diagnostic Status
Estimated Duration
Time Left
When the RMX enters "Diagnostics Mode", the status MPM+/MPMx, CNTL/CNTL
1500/CNTL 4000 and RTM IP/RTM IP 1500/RTM IP 4000 changes to "Diagnostics"
Description
Basic Diagnostic Status:
•
Ready - ready to run diagnostics
•
Test in Progress - running diagnostics
•
Passed/Failed - Passed/Failed the diagnostics tests
Estimated time needed to run Basic Diagnostic tests.
Estimated time to complete Basic Diagnostic tests.
Chapter 20-RMX Hardware Monitoring
20-27