Ip Network Monitoring - Polycom RMX 1500 Administrator's Manual

Polycom RMX 1500/2000/4000 Administrator's Guide

IP Network Monitoring

The Signaling Monitor is the RMX entity used for monitoring the status of external network
entities such as the gatekeeper, DNS, SIP proxy and Outbound proxy and their interaction
with the MCU.
To monitor signaling status:
1
2
14-24
In the RMX Management pane, click Signaling Monitor (
In the Signaling Monitor pane, double-click Default IP Service.
The IP Network Services Properties – RMX CS IP tab opens:
The RMX CS IP tab displays the following fields:
IP Network Services Properties
Table 14-14
Field
Service Name
IPv4
RMX CS IP
–
The name assigned to the IP Network Service by the Fast
Configuration Wizard.
Note: This field is displayed in all tabs.
IP Address
Default The IP address of the default router. The default
Router IP router is used whenever the defined static routers
Address are not able to route packets to their destination.
The default router is also used when host access is
restricted to one default router.
Subnet Mask The subnet mask of the MCU.
Default value: 255.255.255.0.
).
Description
Polycom, Inc.