Polycom RMX 1500 Administrator's Manual page 39

Polycom, Inc.
Table 1-2 Profile Properties - Video Settings
Field/Option
Presentation Mode
Lecture View
Switching
Send Content to
Legacy Endpoints
Site Names
Same Layout
Description
Select this option to activate the Presentation Mode. In this mode,
when the current speaker speaks for a predefined time (30 seconds),
the conference changes to Lecture Mode. When another participant
starts talking, the Presentation Mode is cancelled and the conference
returns to the previous video layout.
Select this option to enable automatic switching of participants on the
Lecturer's screen when Lecture Mode is enabled for the conference.
The automatic switching is enabled when the number of participants
exceeds the number of video windows displayed on the Lecturer's
screen.
Note: Lecture Mode is enabled in the Conference Properties –
Participants tab. For more information, see "Lecture Mode" on
page 2-75.
When enabled (default), Content can be sent to H.323/SIP/ISDN
endpoints that do not support H.239 Content (legacy endpoints) over
the video (people) channel. For more details, see Chapter 2,
"Sending Content to Legacy Endpoints" on page 2-31.
Notes:
•
This option is enabled in MPM+ and MPMx Card Configuration
Modes only.
•
When enabled, additional video resources are allocated to the
conference:
•
In MPM+ mode, an additional SD video resource is allocated.
•
In MPMx mode, an additional HD video resource is allocated.
• This option is valid when sending Content as a separate stream is
enabled by the system flag: ENABLE_H239 set to YES.
• Select this option when Avaya IP Softphone will be connecting to
the conference.
• If High Definition Video Switching option is selected in the
Conference Profile - General tab, the Send Content to Legacy
Endpoints selection is cleared and the option is disabled.
•
If the Same Layout option is selected, the Send Content to
Legacy Endpoints selection is cleared and is disabled.
Clear this check box to hide the display of site names on the endpoint
screens during the conference. When selected (default), site names
are displayed during the conference, whenever the conference
speaker changes.
Select this option to force the selected layout on all participants in a
conference. Displays the same video stream to all participants and
personal selection of the video layout is disabled. In addition, if
participants are forced to a video layout window, they can see
themselves.
Chapter 1-Conference Profiles
1-17