Polycom RMX 1500 Administrator's Manual page 511

Polycom, Inc.
Table 19-4 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag and Value
ENABLE_EPC
ENABLE_TEXTUAL_CONFE
RENCE_STATUS
FORCE_1X1_LAYOUT_ON_
CASCADED_LINK_CONNE
CTION
FORCE_CIF_PORT_ALLOC
ATION
FORCE_RESOLUTION
FORCE_STATIC_MB_ENCO
DING
Description
When set to YES (default), enables Polycom proprietary
People+.
When set to NO, disables this feature for all conferences and
participants.
Set the value of this flag to NO to disable Text Indication. This
setting is recommended for MCUs running Telepresence
conferences.
Default: YES.
When set to YES, the cascaded link is automatically set to
Full Screen (1x1) in CP conferences forcing the speaker in
one cascaded conference to display in full window in the
video layout of the other conference.
Set this flag to NO when connecting to an MGC using a
cascaded link, if the MGC is functioning as a Gateway and
participant layouts on the other network are not to be forced to
1X1.
Default: YES
Sets the MCU to allocate one CIF video resource to an
endpoint, regardless of the resolution determined by the
Conference Profile parameters. You can specify the endpoint
types for which resource allocation can be forced to CIF
resource, enabling other types of endpoints to use higher
resolutions in the same conference.
Enter the product type to which the CIF resource should be
allocated. Possible values are:
• CMA Desktop - for CMA desktop client
• VSX nnnn - where nnnn represents the model number for
example, VSX 8000.
Use this flag to specify IP (H.323 and SIP) endpoint types that
cannot receive wide screen resolution and that were not
automatically identified as such by the RMX.
Possible values are endpoint types, each type followed by a
semicolon. For example, when disabling Wide screen
resolution in an HDX endpoint enter the following string: HDX;
Note: Use this flag when the flag SEND_WIDE_RES_TO_IP
is set to YES.
This flag supports Tandberg MXP mode of sending and
receiving video by IP endpoint in HD 720p resolution and
Video Quality set to Motion. This mode is not supported for
ISDN endpoints.
Default value: Tandberg MXP.
To disable this flag, enter NONE.
Chapter 19-RMX Administration and Utilities
19-19