Polycom RMX 1500 Administrator's Manual page 154

Polycom RMX 1500/2000/4000 Administrator's Guide
7
8
9
3-24
In the Alias Name/Type field, enter the ID of the cascade-enabled Entry Queue (EQ), the
Conference ID and Password of the destination conference (MCU B) as follows:
EQ ID#Destination Conference ID#Password (Password is optional).
F or E xa m p l e : 78 48 5 #2 40 0 6# 1 23 4
Cascade-enabled
EQ ID
Method B (Using a gatekeeper):
In the Alias Name field, enter the Prefix of MCU B, EQ ID, Destination Conference ID,
and Password, as follows:
MCU Prefix EQ ID#Conference ID#Password (Password is optional)
F o r E xa m p l e : 9 2 57 84 8 5# 24 0 06 # 12 34
MCU Prefix as
registered in the
gatekeeper
Click the Advanced tab.
In the Cascade field, select:
— Slave, if the participant is defined in a conference running on a Slave MCU and
will connect to the Master MCU (in the center of the topology).
— Master, if the participant is defined in a conference running on the Master MCU (in
the center of the topology) dialing from the Master MCU to the Slave MCU.
Click OK.
The cascade-enabled dial-out link is created and the system automatically dials out to
connect the participant to the linked conference, as well as the destination conference.
Destination Password (optional)
Conference ID
Cascade-enabled Conference ID
EQ ID
Password (optional)
Polycom, Inc.