Rmx 2000 Multiple Services Configuration - Polycom RMX 1500 Administrator's Manual

Polycom RMX 1500/2000/4000 Administrator's Guide

RMX 2000 Multiple Services Configuration

Connecting the cables to the RTM IP:
The following cables are connected to the RTM IP on the rear panel of the RMX2000:
Table 14-29
RTM IP Port
LAN 1
LAN 2
LAN 3
Connecting the cables to the RTM LAN:
If RTM LAN or RTM ISDN cards are not installed on the RMX, they must be installed before
connecting the additional network cables for media and signaling.
Table 14-30
RTM IP Port
LAN 1
LAN 2
If one LAN port per RTM ISDN/ RTM LAN card is used, up to two different IP Network
Services can be defined - one for each installed RTM LAN/RTM ISDN cards.
If two LAN ports per each installed RTM LAN card are used, up to four Network Services
can be defined.
14-52
LAN Connections to the RTM IP
Description
–
Management
Modem
LAN Connections to the RTM LAN
Description
Signaling and Media - second Network Service (optional)
Signaling and Media - first Network Service (optional)
Polycom, Inc.