Configuring The Video/Voice Resources In Mpm+ And Mpmx Mode - Polycom RMX 1500 Administrator's Manual

From Version 7.1, MPM media cards are not supported.
To allocate Audio Only resources:
1
2
3

Configuring the Video/Voice Resources in MPM+ and MPMx Mode

Resource re-configuration should only be performed when no conferences are running on the RMX.
There are two Resource Capacity modes in MPM+ and MPMx Mode:
•
•
Polycom, Inc.
In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
Resource Maximum from License
A single slider is displayed, calibrated according to licensed video resources indicated
in CIF ports in the RMX.
Move the slider to the number of Audio Only ports to be allocated.
The slider moves in multiples of two (in MPM and MPM+ Card configuration Modes) or
three (in MPMx Card Configuration Mode), converting CIF video ports to voice ports in
groups of two/three, with each CIF video port converting to five voice ports in MPM
and MPM+ Card configuration Modes and four voice ports in MPMx Card Configuration
Mode. The minimum number of voice ports that can be allocated is 10 (2 video ports x 5
voice ports per video port) in MPM and MPM+ Card configuration Modes and 12 (3 video
ports x 4 voice ports per video port) in MPMx Card configuration Mode.
Click OK.
Flexible Resource Capacity
Fixed Resource Capacity
Chapter 19-RMX Administration and Utilities
19-47