Polycom RMX 1500 Administrator's Manual page 739

5
6
7
8
9
10 In the RMX Web Client Login screen, enter the default Username (POLYCOM) and
Polycom, Inc.
The Fast Configuration Wizard starts.
If no USB key is detected and either: this is the First Time Power-up or the Default IP
Service has been deleted and the RMX has been reset, the following dialog box is
displayed:
For more information about First-time Power-up and the Fast Configuration Wizard see
the RMX 1500/2000/4000 Getting Started Guide, "Procedure 1: First-time Power-up" on
page 2-16.
Enter the following parameters using the information supplied by your network
administrator:
— Control Unit IP Address
— Shelf Management IP Address
— Control Unit Subnet Mask
— Default Router IP Address
Click the Save & Close button.
The system prompts you to sign in with the new Control Unit IP Address.
Disconnect the LAN cable between the workstation and the LAN 2 Port on the RMX's
back panel.
Connect LAN 2 Port on the RMX's back panel to the local network using a LAN cable.
Enter the new Control Unit IP Address in the browser's address line, using a workstation
on the local network, and press Enter to start the RMX Web Client application.
Password (POLYCOM) and click the Login button.
Appendix G-Configuring Direct Connections to RMX
G-5