Manually Adding And Deleting System Flags - Polycom RMX 1500 Administrator's Manual

Polycom RMX 1500/2000/4000 Administrator's Guide

Manually Adding and Deleting System Flags

To add a flag:
1
2
3
19-16
In the System Flags dialog box, click the New Flag (
The New Flag dialog box is displayed.
In the New Flag field enter the flag name.
In the Value field enter the flag value.
The following flags can be manually added to the
Table 19-4 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
ALWAYS_FORWARD_DTMF
_IN_GW_SESSION_TO_ISD
N
(ISDN)
BONDING_CHANNEL_DELA
Y
(ISDN)
BONDING_GROUP_DELAY
(ISDN)
BONDING_NUM_CHANNEL
S_IN_GROUP
(ISDN)
MCMS_PARAMETERS tab
Description
When set to YES, all DTMF codes sent by participants in the
GW session will be forwarded to all PSTN and ISDN
participants in the same GW session.
Range: YES / NO
Default Value: NO
When connecting a bonding group, this is the delay (number
of 1/100 seconds) between dialing attempts to connect
sequential channels.
The channel per second connection performance of ISDN
switches can vary and can cause timing issues that result in
bonding channel disconnection.
Default: 6
When connecting several bonding groups, this is the delay
(number of 1/100 seconds) preceding the first dialing attempt
to connect the next bonding group.
Default: 500
The number of channels in the bonding group to be
connected before dialing the next sequential channel.
Default: 50
) button.
:
Polycom, Inc.