Polycom RMX 1500 Administrator's Manual page 762

Polycom RMX 1500/2000/4000 Administrator's Guide
7
8
9
10 In the Phone Usage box, click the Configure button.
11 In the Available box, click Default Usage and then click the > button.
12 Click OK.
13 In the Add Route dialog box, click OK to save the new route.
H-16
If you have not defined such a prefix in the IP Network Service in the RMX
configuration, you can add it later, using value entered here.
In the Gateways - Addresses box, click the Add button.
The Add Route Gateway dialog box opens.
Select the RMX gateway address that was set up in Configuring the RMX as a Routable
Gateway that appears in the drop down list of gateways.
Click OK to save the address and return to the Add Route dialog box.
The Configure Phone Usage Records dialog box opens.
The Default Usage option appears in the Configured box.
Polycom, Inc.