Creating A Welcome Video Slide - Polycom RMX 1500 Administrator's Manual

9
10 In the Save in field, select the directory where the file will be stored.
11 In the Save as Type field, select the *.wav file format.
12 In the File name box, type a name for the message file, and then click the Save button.
13
To upload your recorded *.wav file to the RMX, see step 6 on

Creating a Welcome Video Slide

The video slide is a still picture that can be created in any graphic application.
To create a welcome video slide:
1
2
3
To upload your video slide to the RMX, see step 12 on
If using a default Polycom slide, the slide's resolution will be as defined in the profile, i.e. SD, HD or
CIF.
If the display of the Welcome slide is cut in the upper area of the screen, change the settings of the
endpoint's monitor to People "Stretch" instead of "Zoom".
Polycom, Inc.
Click OK.
The system returns to the Save As dialog box.
To record additional messages, repeat steps 1 to 10.
Using any graphic application, save your image in either *.jpg or *.bmp file format.
For optimum quality, verify that the image's dimensions adhere to the RMX's
maximum values: Width:1600, Height:1200 pixels.
Save your file.
page 15-9
.
page 15-24
.
Chapter 15-IVR Services
15-31