Polycom RMX 1500 Administrator's Manual page 512

Polycom RMX 1500/2000/4000 Administrator's Guide
19-20
Table 19-4 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag and Value
H323_FREE_VIDEO_RESO
URCES
H245_TUNNELING
H239_FORCE_CAPABILITIE
S
H264_BASE_PROFILE_MIN
_RATE_SD30_SHARPNESS
H264_BASE_PROFILE_MIN
_RATE_HD720P30_SHARP
NESS
H264_BASE_PROFILE_MIN
_RATE_HD1080P30_SHARP
NESS
H264_BASE_PROFILE_MIN
_RATE_CIF60_MOTION
H264_BASE_PROFILE_MIN
_RATE_SD60_MOTION
Description
For use in the Avaya Environment.
In the Avaya Environment there are features that involve
converting undefined dial-in participants' connections from
video to audio (or vice versa). To ensure that the participants'
video resources remain available for them, and are not
released for use by Audio Only calls, set this flag to NO.
If set to YES, the RMX will release video resources for Audio
Only calls.
Default: YES.
For use in the Avaya Environment.
This flag is defined in the System Flags –
CS_MODULE_PARAMETERS section.
In the Avaya Environment, set the flag to YES to ensure that
H.245 is tunneled through H.225. Both H.245 and H.225 will
use the same signaling port.
Default: NO.
When the flag is set to NO, the RMX only verifies that the
endpoint supports the Content protocols: Up to H.264 or
H.263.
When set to YES, the RMX checks frame rate, resolution and
all other parameters of the Content mode as declared by an
endpoint before receiving or transmitting Content.
Default: NO.
Prior to Version 7.0.2, this flag set the minimum bitrate
threshold for endpoints that did not support H.264 High Profile
for SD30 resolution using Sharpness Video Quality.
Default: 256kbps
Prior to Version 7.0.2, this flag set the minimum bitrate
threshold for endpoints that did not support H.264 High Profile
for HD720P30 resolution using Sharpness Video Quality.
Default: 1024kbps
Prior to Version 7.0.2, this flag set the minimum bitrate
threshold for endpoints that did not support H.264 High Profile
for HD1080P30 resolution using Sharpness Video Quality.
Default: 1536kbps
Prior to Version 7.0.2, this flag set the minimum bitrate
threshold for endpoints that did not support H.264 High Profile
for CIF60 resolution using Motion Video Quality.
Default: 256kbps
Prior to Version 7.0.2, this flag set the minimum bitrate
threshold for endpoints that did not support H.264 High Profile
for SD60 resolution using Motion Video Quality.
Default: 1024kbps
Polycom, Inc.