Direct Dialing From Isdn/Pstn Endpoint To Ip Endpoint Via A Meeting Room - Polycom RMX 1500 Administrator's Manual

Direct Dialing from ISDN/PSTN Endpoint to IP Endpoint via a
Meeting Room
Dialing from an ISDN endpoint to a specific IP endpoint using the Gateway Profile is a two-
step process (dialing to the Gateway and then entering the number of the destination IP
endpoint).
When dialing to specific IP endpoints you can simplify the dialing process by creating the
appropriate Meeting Room.
If CMA is involved, dialing can be simplified even further by configuring the appropriate
dialing Rule in the CMA.
To set up the Meeting Room for direct dialing in:
Set the conference parameters in the Conference Profile and make sure that the conference
will automatically end when there is only one participant connected to the meeting.
Define the Meeting Room with the following:
•
Polycom, Inc.
Conference Profile in which the Auto Terminate - At the end - When Last Participant
Remains option is selected. For more details on Conference Profile definition, see
"Defining the IVR Service for Gateway Calls" on page 17-9.
Chapter 17-Gateway Calls
17-19