Polycom RMX 1500 Administrator's Manual page 669

Table C-4
Field
Maximum Number
of Participants
Audio Board ID
Audio Unit ID
Video Board ID
Video Unit ID
Data Board ID
Data Unit ID
Message Service
Type
Conference IVR
Service
Lecture Mode Type
Lecturer
Time Interval
Lecturer View
Switching
Polycom, Inc.
Event Fields for Event 2001 - CONFERENCE START CONTINUE 1 (Continued)
Description
The maximum number of participants that can connect to the conference at
one time.
The value 65535 (auto) indicates that as many participants as the MCU's
resources allow can connect to the conference, up to the maximum possible
for the type of conference.
Not supported.
Always contains the value 65535.
Not supported.
Always contains the value 65535.
Not supported.
Always contains the value 65535.
Not supported.
Always contains the value 65535.
Not supported.
Always contains the value 65535.
Not supported.
Always contains the value 65535.
The Message Service type.
Currently the only value is:
3 - IVR
The name of the IVR Service assigned to the conference.
Note: If the name of the IVR Service contains more than 20 characters, it will
be truncated to 20 characters.
Indicates the type of Lecture Mode, as follows:
0 - None
1 - Lecture Mode
3 - Presentation Mode
Note: This field is only relevant if the Lecture Mode Type is Lecture Mode.
The name of the participant selected as the conference lecturer.
Note: This field is only relevant if Lecturer View Switching is enabled.
The number of seconds a participant is to be displayed in the lecturer window
before switching to the next participant.
Currently the only value is 15.
Note: This field is only relevant when Lecture Mode is enabled.
Indicates the lecturer view switching setting, as follows:
0 - Automatic switching between participants is disabled.
1 - Automatic switching between participants is enabled.
Appendix C-CDR Fields - Unformatted File
C-13