Connected Participant Parameters - Polycom RMX 1500 Administrator's Manual

Polycom RMX 1500/2000/4000 Administrator's Guide
For example: if the Gateway Profile display name is Default_GW_Session, the conference
name will be GW_Default_GW_Session(001).
Conference ID:
The ID of the new conference is assigned randomly by the MCU.
The Gateway Session automatically ends when only one participant is left in the session.

Connected Participant Parameters

Once this conference is created, the calling participant is connected to it and one or several
dial-out participant(s) are automatically created and added to this gateway session. The dial-
in participant is also identified as the chairperson of the conference.
The connecting (dial-in) participant name is taken from the endpoint. If the endpoint does
not send its name, it is derived from the Gateway Profile display name and it includes the
Gateway Session name, underscore and a random number is displayed (between brackets),
for example, GW_Default_GW_Session(001)_(000).
The name of the destination (dial-out) participant is taken from the endpoint. If the endpoint
does not send its name, it is taken from the dialed number. If the dialed number was an IP
address, the system displays underscores instead of dots, for example, 172_22_172_89.
Participants connected to a gateway session are monitored in the same way as participants
connected to ongoing conferences. For details, see RMX 2000 Administrator's Guide,
"Participant Level Monitoring" on page 11-13.
17-18
Polycom, Inc.