Polycom RMX 1500 Administrator's Manual page 387

9
10 Define the Primary and Alternate Gatekeepers and at least one Alias for this network
In Multiple Services mode, an Alias must be defined for the specified gatekeeper.
11 Optional. Click the Ports tab.
12 If required, click the QoS tab.
The routers must support QoS in order for IP packets to get higher priority.
13 Click the SIP Servers tab.
14 Define the Primary and Alternate SIP Server for this network Service.
•
•
•
15 Click the Security tab.
Polycom, Inc.
Table 14-33 Default Management Network Service – DNS (Continued)
Field
DNS Server Address
Click the Gatekeeper tab.
Service. The field definitions of the Gatekeeper tab are the same as for the Default IP
Network Service. For more information see "Click the Gatekeeper tab." on page 14-13.
Settings in the Ports tab allow specific ports in the firewall to be allocated to multimedia
conference calls. If required, defined the ports to be used multimedia conference calls
handled by this Network Service. The field definitions of the Ports tab are the same as
for the Default IP Network Service.
For more information see the RMX 1500/2000/4000 Administrator's Guide, "Click the
Ports tab." on page 14-14.
RMX's implementation of QoS is defined per Network Service, not per endpoint.
The field definitions of the QoS tab are the same as for the Default IP Network Service. For
more information see the RMX 1500/2000/4000 Administrator's Guide, "If required, click
the QoS tab." on page 14-16.
Starting with Version 7.1, Registration of conferencing entities with the SIP Servers was moved
to the conferencing entities and is defined in the Conference Profile.
If Microsoft Office Communications or Lync server are part of this network service, a certificate
must be created for this network service. If each network connected to the RMX includes
Microsoft Office Communications or Lync server, separate certificates must be created and sent
to the MCU for each of these networks.
If the Network Service does not include a DNS, you must use the IP address of the SIP Server
instead of its name.
The field definitions of the SIP Servers tab are the same as for the Default IP Network
Service. For more information see the RMX 1500/2000/4000 Administrator's Guide, "Click
the SIP Servers tab." on page 14-18.
The field definitions of the Security tab are the same as for the Default IP Network Service.
For more information see the RMX 1500/2000/4000 Administrator's Guide, "Click the
Security tab." on page 14-20.
Description
Enter the static IP address of the DNS server that is part of this
network.
Chapter 14-Network Services
14-59