Polycom RMX 1500 Administrator's Manual page 688

Polycom 1500/RMX 2000/4000 Administrator's Guide
Table C-33 Event Fields for Events 107 and 109 - OPERATOR MOVE PARTY FROM CONFERENCE
Field
Party ID
Destination Conf
Name
Destination Conf ID
Table C-34 Event Fields for Events 108, 112 - OPERATOR MOVE PARTY TO CONFERENCE,
Field
Operator Name
Source Conf Name
Source Conf ID
Party Name
Party ID
Connection Type
Bonding Mode
Number Of
Channels
Net Channel Width
Net Service Name
C-32
and OPERATOR ATTEND PARTY (Continued) (Continued)
Description
The identification number of the participant who was moved, as assigned by
the MCU.
The name of the conference to which the participant was moved.
The identification number of the conference to which the participant was
moved.
OPERATOR ATTEND PARTY TO CONFERENCE
Description
The login name of the operator who moved the participant to the conference.
The name of the source conference.
The identification number of the source conference, as assigned by the
MCU.
The name of the participant who was moved.
The identification number assigned to the participant by the MCU.
The connection type, as follows:
0 - Dial-out
5 - Dial-in
Note: This field is only relevant to ISDN/PSTN participants.
Possible values are:
0 - Bonding is disabled
1 - Bonding is enabled

255 - Auto
Note: This field is only relevant to ISDN/PSTN participants.
The number of channels, as follows:
255 - Auto
Otherwise, in range of 1 - 30
The bandwidth of each channel.
This value is always 0, which represents a bandwidth of 1B, which is the only
bandwidth that is currently supported.
The name of the Network Service.
An empty field "" indicates the default Network Service.
Polycom, Inc.