Guidelines - Polycom RMX 1500 Administrator's Manual

Multipoint control unit
Hide thumbs Also See for RMX 1500:
Table of Contents

Advertisement

Polycom RMX 1500/2000/4000 Administrator's Guide

Guidelines

The MULTIPLE_SERVICE System Flag cannot be set to YES when IPv6 Addressing is enabled.
14-46
Multiple Services system mode is a purchasable option and it is enabled in the MCU
license.
Multiple Services system mode is enabled when the system configuration flag
MULTIPLE_SERVICES is added and set to YES.
This option is supported with MPM+ and MPMx media cards.
Multiple Network Services are supported in MCUs with at least 1024MB memory only.
MCU units with memory of 512MB support only one IP Network Service.
Multiple Network Services are NOT supported with Microsoft ICE Environments.
Only IPv4 is supported for the definition of Multiple Network Services.
Up to two Network Services, one per LAN port, can be associated with each Media
card.
On RMX 2000/4000, RTM ISDN or RTM LAN can be used for Multiple Services
configuration. However, if RTM ISDN is installed and used for Multiple Services
configuration, only one Network Service can be associated with the media card to
which the RTM ISDN card is attached.
On RMX 1500, when Multiple Network Services option is enabled, the two networks
must differ in their subnet masks.
On the RMX 1500, LAN redundancy cannot be enabled in parallel to Multiple
Networks and the LAN_REDUNDANCY flag must be set to NO when the Multiple
Networks option is enabled.
An IP Network Service can be associated with one or several media cards.
If more than one card is associated with the same Network Service, the system routes
the calls to the appropriate card according to resource availability
Participants on different networks can connect to the same conference with full audio,
video and content capabilities.
Traffic on one network does not influence or affect the traffic on other networks
connected to the same MCU, unless they are connected to the same media card. If one
network fails, it will not affect the traffic in the other connected networks, unless they
are connected to the same media card and the card fails.
Maximum number of services that can be defined per RMX platform:
Table 14-25
Maximum Number of Network Services per RMX System
RMX Platform
IP Network Services
RMX 1500
Up to 2
RMX 2000
Up to 2 (combination of RTM ISDN and/or
RTM LAN) or
Up to 4 (using 2 RTM LAN cards, less
when using up to 2 RTM ISDN cards)
Management
Services
1
1
Polycom, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RMX 1500 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Rmx 4000Rmx 2000

Table of Contents