Procedure 5: Configuring An Ad Hoc Entry Queue On The Rmx If Dma Is Not Used - Polycom RMX 1500 Administrator's Manual

6
7
8
Procedure 5: Configuring an Ad Hoc Entry Queue on the RMX if DMA is not
used
You must discuss the selection of the appropriate Profile for this EQ, as this Profile will be
used to create the conferences on the RMX and they must be TIP enabled.
1
Polycom, Inc.
Click the Video Settings tab.
If the TIP Compatibility Mode was set to Video and Content, the Send Content to Legacy
Endpoints disabled. This setting cannot be changed.
Set the Telepresence Mode to Auto.
Assign the New Profile to the Meeting Room. For more information see "Creating a New
Meeting Room" on page 4-4.
Create or select the Entry Queue as described in "Entry Queues" on page 5-1.
Appendix I-RMX and Cisco Telepresence Systems (CTS) Integration
I-21