State and Status Information
In this appendix
Encryption engine security processor (SP) states
Table 18
TABLE 18
Encryption engine security processor (SP) state Description
Not available
Not Brocade Encryption Switch or DCX
Not Ready
Fail to connect to blade
Starting
SPC Connecting to SP
SPC Connected to SP
SP Initialized
Waiting for initnode
Disabled
Encryption engine Faulty
Waiting for initEE
Waiting for regEE
Waiting for enableEE
Operational; Not Online
Operational; Need Valid KEK
Operational; Need Encryption Group
Online
Zeroized
INVALID
Fabric OS Encryption Administrator's Guide
53-1002159-03
•
Encryption engine security processor (SP) states . . . . . . . . . . . . . . . . . . . . 249
•
Security processor KEK status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
•
Encrypted LUN states . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
lists the encryption engine security processor (SP) states.
Encryption engine security processor (SP) states
SLOT_XXX_SCN has not been received (debug message).
Debug message.
BLADE_RDY_SCN has not been received (debug message).
Encryption engine is not connected to the blade processor.
BLADE_RDY_SCN received and initializing.
Establishing connection to CP.
Connection to CP established.
SP initialization completed.
SP is awaiting initialization. Run initnode.
SP is disabled.
Encryption engine is faulty (BP fault or SP fault). Issue reboot.
SP is awaiting initialization. Run initEE.
SP has its own certificates but is awaiting FIPS certificates. Run
regEE.
Awaiting the explicit enabling of encryption engine. Run enableEE.
Encryption engine is operational but offline.
No current master key or primary or secondary link key. Check the
KEK status for more details.
Encryption engine is operational, but EG is not configured or EG
information is not available. Check EG status.
Encryption engine is online.
Encryption engine is zeroized
Encryption engine is invalid
Appendix
A
249