Views; Boot_Image_File_Details_Info; Cee_Port_Info - Brocade Communications Systems Brocade 8/12c User Manual

E

Views

TABLE 393
Field
VM_NODE_WWN
TARGET_NODE_WWN
HBA_NAME
Views

BOOT_IMAGE_FILE_DETAILS_INFO

create or replace view BOOT_IMAGE_FILE_DETAILS_INFO as
select
from
where

CEE_PORT_INFO

create or replace view CEE_PORT_INFO as
select
1144
VM_PATH
(Continued)
Definition
The initiator node WWN used by the VM. If NPIV is
used, this is a virtual node WWN assigned to the VM.
If NPIV is not used, this WWN is the same as the node
WWN of one of the HBAs in the host.
The node WWN of the destination target
The hypervisor device name of the HBA used in this
path, such as vmhba1
BOOT_IMAGE_FILE_DETAILS.BOOT_IMAGE_NAME,
BOOT_IMAGE_FILE_DETAILS.MAJOR_VERSION,
BOOT_IMAGE_FILE_DETAILS.MINOR_VERSION,
BOOT_IMAGE_FILE_DETAILS.MAINTENANCE,
BOOT_IMAGE_FILE_DETAILS.PATCH,
BOOT_IMAGE_FILE_DETAILS.IMPORTED_DATE,
BOOT_IMAGE_FILE_DETAILS.RELEASE_DATE,
BOOT_IMAGE_FILE_DETAILS.RELEASE_NOTES_LOCATION,
BOOT_IMAGE_FILE_DETAILS.LOCATION,
BOOT_IMAGE_DRIVER_MAP.SUPPORTED_DRIVERS
BOOT_IMAGE_FILE_DETAILS,
BOOT_IMAGE_DRIVER_MAP
BOOT_IMAGE_FILE_DETAILS.DRIVER_MAPPING_ID= BOOT_IMAGE_DRIVER_MAP.ID;
GIGE_PORT.ID,
GIGE_PORT.SWITCH_PORT_ID,
GIGE_PORT.PORT_NUMBER,
CEE_PORT.ID AS CEE_PORT_ID,
CEE_PORT.VIRTUAL_SWITCH_ID,
CEE_PORT.IF_INDEX,
CEE_PORT.IF_NAME,
CEE_PORT.IF_MODE,
CEE_PORT.L2_MODE,
CEE_PORT.VLAN_ID,
CEE_PORT.LAG_ID,
CEE_PORT.IP_ADDRESS,
CEE_PORT.MAC_ADDRESS,
CEE_PORT.PORT_SPEED,
CEE_PORT.ENABLED,
Format
char
char
varchar
Brocade Network Advisor SAN User Manual
53-1002167-01
Size
23
23
64