Defects; Closed With Code Change Defects In Multi-Service Ironware R02.7.02A; Ironware Software Release 02.7.02A For Brocade Bigiron Rx Series Swtches - Brocade Communications Systems PowerConnect B-RX Release Note

Defects

Closed with Code Change Defects in Multi-Service IronWare
R02.7.02a
This section lists defects closed in Multi-Service IronWare R02.7.02a. Note that when a workaround to an
issue is available, it is provided.
Reported release indicates the product and release that the defect was first identified. If the
NOTE:
problem also appeared in other Brocade IP Products, the issue was addressed using the same defect ID.
Defect ID Technical Severity
87485
87842
97953

IronWare Software Release 02.7.02a for Brocade BigIron RX Series Swtches

Release Notes v 1.0
Summary of Software Fixes in R02.7.02a
Summary: Deletion of IGMP static groups may be handled
incorrectly such that the deletion does not take effect.
Probability: Medium
Medium
Feature: IGMP
Function: IGMP
Reported in Release: BigIron RX R02.7.02
Summary: After a reload or an IP rebind action, syslog entries may
not be generated for some filters if multiple L2 ACLs with deny
logging enabled are configured on the same packet processor ASIC.
Probability: Medium
High
Feature: CLI
Function: System
Reported in Release: BigIron RX R02.6.00
Summary: Executing the show ipv6 route x:x::x:x command
shows all routes instead of the best route.
Probability: High
Medium
Feature: IPv6
Function: IPv6 Forwarding
Reported in Release: BigIron RX R02.7.02
Page 38 of 46